Buy Now My Account 0

Household Fire Protection Kit

£110.00

Now there’s a complete solution to safeguard your home against fire. Introducing the Sentinel Household Fire Protection kit – the last word in fire prevention. Your kit contains both the Sentinel Wireless Heat Alarm and two Sentinel Wireless Smoke Alarms which, when used together over two floors, provides a formidable fire prevention solution. Easy to install, the Heat Alarm and Smoke Alarm operate in a circuit, which means that when one is set off, the other sounds too – even if they’re located in entirely separate parts of your house. Each fire detector operates wirelessly – so no need to drill into your mains supply – and come equipped with a 10-year Lithium Battery. In short, these won’t fail you for the next 10 years – or your money back. Sentinel Fire Products offer the ultimate in wireless fire protection and detection systems. Using dip switches on the heat detector, you can link up to 20 units up to a 100m range.

  • Easy setup with wireless installation
  • Battery Only – Quality Non-removable
  • Lithium Battery with 10 year life
  • 10 year warranty
  • Inter-linkable by Radio Frequency
  • 433MHz – up to 20 units
  • Grade F compliant
  • BS EN14604:2005

Reviews

There are no reviews yet.

Be the first to review “Household Fire Protection Kit”

Your email address will not be published. Required fields are marked *

Why buy Sentinel’s smoke alarms?

Sentinel Fire Products offer the ultimate in wireless fire protection and detection systems. Using dip switches on the heat detector, you can link up to 20 units up to a 100m range.

Sentinel’s wireless heat alarm detection system takes less than 10 minutes to install. It is powered by a 10-year Energiser lithium battery meaning minimal time is needed for fitting and activating.

This wireless heat alarm circuit does not need to be drilled and wired in. The fire detection system has a low battery warning, hush option and test button, so you can ensure your family is safe with ease.

Sentinel’s wireless fire alarm solution offers all-round value for money and comes with a 10-year product warranty (from date of manufacture) as well as a ‘replace by’ sticker.

Where to install a heat detector system?

The best heat detector locations are:

  • As close to the centre of a room as possible
  • At least 4 inches from a wall or corner
  • Ideal for garages, boiler rooms, lofts or areas that have high levels of fumes, smoke or dust

For the best protection, use in conjunction with smoke alarms.

How to install the Sentinel wireless heat alarm

Sentinel’s wireless interlinked alarm system can be used for single story and multi-story buildings.
It takes less than 10 minutes to install.
Step 1 – Measure up where you want your alarm to go and mark on the ceiling
Step 2 – Drill the holes Step 3 – Insert wall plugs
Step 4 – Secure the mounting base with screws
Step 5 – Set the dip switch to the same position on all units
Step 6 – Turn detector clockwise until the snap lock engages
Step 7 – Test heat alarm

Additional information

Product 1

Wireless Heat Detector (GH310RF)

Size and weight (GH310RF)

Diameter: 122mm
Depth: 40mm
Weight: 110g

Use (GH310RF)

For use in the Kitchens, Attics and Garages.
Not for use in Bedrooms, Bathrooms, Hallways and Landings.

Product Features (GH310RF)

• Radio linked using 433MHz – linkable with up to 20 units
• Fixed temperature heat detector
• Link wirelessly using simple dip switch combinations (16 different options available), allow a minute to link, then press test button to link the detectors in the group and allow up to 30 seconds for the test to be successful
• Completely wireless installation, takes just minutes to fit
• Sealed in (non- removable) 10 year Life 3v Lithium Battery
• 10 year product warranty (from date of manufacture)
• Easy fit base, with simple click fit detector mounting
• Hush feature
• Test button for both alarm and power test
• Alarm source indicator • Low battery signal
• Loud 85dB signal
• Tested at every stage of the manufacturing process (5 in total)

Product 2

2 Wireless Optical Smoke Detector (GS610RF)

Size and weight (GS610RF)

Diameter: 122mm
Depth: 40mm
Weight: 110g

Use (GS610RF)

Suitable for all rooms.

Product Features (GS610RF)

• Radio linked using 433MHz – linkable with up to 20 units
• Link wirelessly using simple dip switch combinations (16 different options available), allow a minute to link, then press test button to link the detectors in the group and allow up to 30 seconds for the test to be successful
• Completely wireless installation, takes just minutes to fit
• Photo Electric Sensor – less prone to false alarms, and ideal
for detecting slow smouldering fires
• Sealed in (non- removable) 10 year Life 3v Lithium Battery
• 10 year product warranty (from date of manufacture)
• Easy fit base, with simple click fit detector mounting
• Hush feature
• Test button for both alarm and power test
• Alarm source indicator
• Low battery signal
• Loud 85dB signal
• Tested at every stage of the manufacturing process (5 in total)