Why buy Sentinel’s smoke alarms?
Sentinel Fire Products offer the ultimate in wireless fire protection and detection systems. Using dip switches on the smoke detector, you can link up to 20 units up to a 100m range. Sentinel’s wireless smoke alarm detection system takes less than 10 minutes to install. It is powered by a 10-year Energiser lithium battery meaning minimal time is needed for fitting and activating. This wireless smoke alarm circuit does not need to be drilled and wired in. The fire detection system has a low battery warning, hush option and test button, so you can ensure your family is safe with ease. Sentinel’s wireless fire alarm solution offers all-round value for money and comes with a 10-year product warranty (from date of manufacture) as well as a ‘replace by’ sticker.
Where to install a heat detector system?
The best smoke alarm locations are:
- As close to the centre of a room as possible
- At least 4 inches from a wall or corner
- Ideal for garages, boiler rooms, lofts or areas that have high levels of fumes, smoke or dust
For the best protection, use in conjunction with smoke alarms.
How to install the Sentinel wireless heat alarm
Sentinel’s wireless interlinked alarm system can be used for single story and multi-story buildings.
It takes less than 10 minutes to install.
Step 1 – Measure up where you want your alarm to go and mark on the ceiling
Step 2 – Drill the holes Step 3 – Insert wall plugs
Step 4 – Secure the mounting base with screws
Step 5 – Set the dip switch to the same position on all units
Step 6 – Turn detector clockwise until the snap lock engages
Step 7 – Test heat alarm